Results 1 to 4 of 4
Thread: Solder plate for evaporator
-
25-01-2012, 11:44 PM #1
Solder plate for evaporator
Hey everybody
For an ice maker I am manufacturing an evaporator from a stainless steel pipe with copper tubing coiled around it. I want to try using plate solder to solder the copper to the SS. All I can find is silver plate solder for jewelry applications. Does anyone know where I can get some tin-based plate solder?
-
26-01-2012, 04:28 AM #2
Re: Solder plate for evaporator
B”H
I would suggest to find company doing deep galvanizing, they can do it for you.
-
26-01-2012, 09:06 AM #3
Re: Solder plate for evaporator
Use the solder like they use for soldering copper or zinc gutters after using staining (correct word?) powder or gel.
We do it that way, there are some pictures of us on this forum of it.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
26-01-2012, 11:35 AM #4
Re: Solder plate for evaporator
Contact Handy Harmon. I have been using their solders for joining different metals and they have production shaped pre-forms formost things. I think you might find that copper to SS will take some silver based stuff.