Results 1 to 5 of 5
Thread: Compressor and parts source
-
17-01-2012, 02:53 PM #1
Compressor and parts source
Hi guys just a couple of questions, firstly does anyone know the equivalent ACC, Lunite and Danfoss compressors for a Tecumseh AKL26ZS, R404A for a freezer?
Secondly i need an evap plate/coil for a Polar CD084 upright fridge and an Evap Coil for a HUS8 double door fridge(is this husky??) Phoned a load of companies off the net and no-one can track the parts down. Any info will be great!!!
Thanks in advance
-
17-01-2012, 03:52 PM #2
Re: Compressor and parts source
You can get polar spares from Nisbets http://www.nisbets.co.uk/3/Catering-...02c03c01.r16.1 regarding the compressor, any wholesaler will be able to match it with an equivelant or check this chart http://www.kooltech.co.uk/clientfile...OMPRESSORS.pdf verify your evaporating temperature and select an equivelant from the FSW book or similar, the HUS8 sounds familiar, a picture may be beneficial.
-
17-01-2012, 10:55 PM #3
Re: Compressor and parts source
Already tried Nisbets, the compressor is for a customer who likes to buy his own from HRP, i dont usually use them and the guy at HRP couldnt tell me what their equivalent was so thought i would try here, thanks for the info!
-
17-01-2012, 11:21 PM #4
Re: Compressor and parts source
Found this doc.. see page 9
http://www.gaf.be/pdf/Prijslijst%20G...012%20Ned..pdf
Sicom - AKL26ZS
equals
Electrolux - MS26FB
U.Hermetique - CAJ2446Z
Aspera - NJ2192GKBrian - Newton Abbot, Devon, UK
Retired March 2015
-
18-01-2012, 07:39 PM #5
Re: Compressor and parts source
Thats all the info i need thanks Brian!!