Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2008
    Location
    UK
    Age
    39
    Posts
    174
    Rep Power
    16

    Compressor and parts source



    Hi guys just a couple of questions, firstly does anyone know the equivalent ACC, Lunite and Danfoss compressors for a Tecumseh AKL26ZS, R404A for a freezer?
    Secondly i need an evap plate/coil for a Polar CD084 upright fridge and an Evap Coil for a HUS8 double door fridge(is this husky??) Phoned a load of companies off the net and no-one can track the parts down. Any info will be great!!!
    Thanks in advance



  2. #2
    Join Date
    Jun 2005
    Location
    Stoke on Trent
    Age
    62
    Posts
    588
    Rep Power
    19

    Re: Compressor and parts source

    You can get polar spares from Nisbets http://www.nisbets.co.uk/3/Catering-...02c03c01.r16.1 regarding the compressor, any wholesaler will be able to match it with an equivelant or check this chart http://www.kooltech.co.uk/clientfile...OMPRESSORS.pdf verify your evaporating temperature and select an equivelant from the FSW book or similar, the HUS8 sounds familiar, a picture may be beneficial.

  3. #3
    Join Date
    Oct 2008
    Location
    UK
    Age
    39
    Posts
    174
    Rep Power
    16

    Re: Compressor and parts source

    Already tried Nisbets, the compressor is for a customer who likes to buy his own from HRP, i dont usually use them and the guy at HRP couldnt tell me what their equivalent was so thought i would try here, thanks for the info!

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Compressor and parts source

    Found this doc.. see page 9
    http://www.gaf.be/pdf/Prijslijst%20G...012%20Ned..pdf

    Sicom - AKL26ZS
    equals
    Electrolux - MS26FB
    U.Hermetique - CAJ2446Z
    Aspera - NJ2192GK
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  5. #5
    Join Date
    Oct 2008
    Location
    UK
    Age
    39
    Posts
    174
    Rep Power
    16

    Re: Compressor and parts source

    Thats all the info i need thanks Brian!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •