Results 1 to 5 of 5
-
02-01-2012, 05:36 AM #1
wattage for a SO45LKAA matsu****a compressor
I have a leaker and want to run a new capillary to 1/4"copper wrapped around the old evap coil
but wonder if anyone has the wattage for a SO45LKAA matsu****a compressor , once I have that I can work it out so let me know . I know I can guess and be approximate and all but just asking , did a search and nothing came up on any of the brands or model numbers which I thought was weird , something always comes up with no matter what you search for these days .
60% of the time it works everytime.
-
02-01-2012, 10:11 AM #2
Re: wattage for a SO45LKAA matsu****a compressor
can you not cut out the leaking section and joint it with 1/4 pipe.
-
03-01-2012, 09:17 PM #3
Re: wattage for a SO45LKAA matsu****a compressor
No not quite Im talking about the low pressure alloy plate ( evap ) having a leak so I want to wrap 1/4 copper around that to become the new evaporator ( I have seen this done before ) .
I will end up using the old capillary as most of it is there at the back but its alway good to replace capillaries but hey what the F..... nobody else seems to do it .60% of the time it works everytime.
-
03-01-2012, 09:23 PM #4
Re: wattage for a SO45LKAA matsu****a compressor
http://www.laco.com/prod/45/heat-sea...xy-sealer.aspx
if you can find the leak-if not 15 mtr of 1/4 pipe it is!! good luck
-
03-01-2012, 11:00 PM #5
Re: wattage for a SO45LKAA matsu****a compressor
To the optimist, the glass is half full. To the pessimist, the glass is half empty.