Results 1 to 7 of 7
-
28-12-2011, 08:10 PM #1
Pipe sizing on williams gem units
Had a call to a williams gem unit today.
The pipe sizings were a bit strange.... suction was 1/2 in but the discharge was awkward, so i got out the swaging kit, no size was right for it!!! Does this unit use some metric stuff or a mix maybe?? the liquid line also seems real heavy guage and does not swage out right yet
looks like 1/4!!
Can anyone help us??
-
28-12-2011, 08:31 PM #2
Re: Pipe sizing on williams gem units
3/16 or 5/16- doesnt matter 3/8 will sleeve over it and braze it!
-
28-12-2011, 08:37 PM #3
Re: Pipe sizing on williams gem units
i did mention that i could use a bit of 3/8, got told no!!! Didnt get any other suggestions tho... funny that!!
Cheers install monkey
-
28-12-2011, 08:39 PM #4
Re: Pipe sizing on williams gem units
weird discharge size??
-
28-12-2011, 09:06 PM #5
Re: Pipe sizing on williams gem units
them williams gem display fridges are over 15yr old,where anything goes
-
28-12-2011, 09:24 PM #6
Re: Pipe sizing on williams gem units
noted!! im sure they are just re-badged up cornelius jobbies, cos the serial numbers are in the same handwriting!!
-
29-12-2011, 12:58 AM #7
Re: Pipe sizing on williams gem units
To the optimist, the glass is half full. To the pessimist, the glass is half empty.