Results 1 to 5 of 5
Thread: Nvq level 3 engineers drawings
-
26-11-2011, 08:13 PM #1
Nvq level 3 engineers drawings
Evening all,
Help required I'm currently studying level 3 installation and commissioning and I'm Banging my head against the wall trying to answer the following. How do different types of engineer drawings interrelate.
Many thanks
-
26-11-2011, 11:41 PM #2
Re: Nvq level 3 engineers drawings
Are you talking about the different trades that may produce drawings for a project or, what do you mean by engineer drawings?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
27-11-2011, 10:29 AM #3
Re: Nvq level 3 engineers drawings
Hi Brian,
Thanks for taking the time by different types of drawings I assume that they mean piping and instrument, electrical single line and schematics, electronic diagrams and schematics, logic diagrams and prints, fabrication, construction and architectural. As the first part of the questions is what are the different types of drawings used and how do they interrelate. Not sure if I'm trying to over complicate the question or not.
Cheers
-
28-11-2011, 06:20 PM #4
Re: Nvq level 3 engineers drawings
In Refrigeration and air conditioning technology standardised symbols are used for process schematics. Forrefrigeration, the standard EN 1861 Refrigeration Systems and Heat Pumps applies, and for air conditioning technology, the standard DIN 1946 Ventilation and Air Conditioning Technology applies.
All the best
taz
.
-
09-12-2011, 08:43 PM #5
Re: Nvq level 3 engineers drawings
Cheers taz, clear as mud!