carrier xarios y micro voltage

[cadwaladr]

are these micro,s voltage sesitive a supplier has sent me a new one when i asked for a 24 volt one his answer was they are all the same voltage? want to check before I fry it!!

[UKengineer]

Micro works with 12 or 24 volts.
You just have to set the configs on the display to correct voltage...

[cadwaladr]

ok many thanks

[djbe]

Micro works with 12 or 24 volts.
You just have to set the configs on the display to correct voltage...

what he says, just press the hidden button on the cab control and set to 24V.

No problems, but drop me a note next time you need one as have loads of good used.

[cadwaladr]

shoot just got a new one last week,la de dah!

[alphalaval]

hi i have a problem on xarios 500. i got dead display, when i swap the dead one with on the other working unit it works there. any help/ wiring diagram.
cheers

[clivemtk]

depending on age inside micro is a 1amp fuse it looks like a little capacitor pull out check with meter on newer models there are 2 fuses

[sonkax]

Also check cable and +12v on pin 4 from ignition