Results 1 to 10 of 10
Thread: What to do
Hybrid View
-
20-10-2005, 07:21 PM #1
Re: What to do
A spark outta his depth
Ask yourself if you would be happy advising a carpenter how to install a new distribution panel he had just bought.
We are all tradesmen but in different disciplines. Whilst we may have a basic understanding of each others trade we are by no means expert or have the necessary tools. Could the carpenter fix the dist board - yes, could he connect all the wires - yes, could he test Zs, R1 + R2, insulation etc - no because he doesn't have the tools or knowledge. His installation would therefore not be safe so he would need a Spark to finish and certify his work.
It's the same for out trade mate. We've all spent a lot of time getting qualified and invested in the correct tools. Save yourself a lot of woe (and build on the saving you have made so far by buyiny the kit yourself) and get some help from a friendly tradesmen. I'm quite sure that someone from the forum lives local to you so why not ask for assistance here?Last edited by frank; 20-10-2005 at 07:23 PM.