Results 1 to 1 of 1
Thread: Hot Gas Defrost design
-
10-11-2011, 11:57 PM #1
Hot Gas Defrost design
OK, I have the Lodam control and it is only set up to defrost using hot gas through a relay. I have looked around but I haven't seen guidelines for design and sizing the solenoid valve or line sizing/placement. The control will stop my liquid pump upon defrost and that is apparently not changeable.
Anyone got any info (on sizing the hot gas line and valve, not the Lodam control? I may not have been clear)Last edited by MikeHolm; 11-11-2011 at 11:22 AM. Reason: ambiguous question