Results 1 to 6 of 6
Thread: York AWHC40L
-
31-10-2011, 03:16 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- May 2006
- Location
- uk
- Age
- 60
- Posts
- 5
- Rep Power
- 0
York AWHC40L
Hello There,
We have a problem with a VERY old (circa 1983) York chiller model number AWHC40L50E. Would anyone out there have a wiring diagram for it?
Thanks in advance!!
-
31-10-2011, 05:53 PM #2
Super Moderator
- Join Date
- Sep 2007
- Location
- Somerset
- Age
- 69
- Posts
- 4,698
- Rep Power
- 46
Re: York AWHC40L
Bones.
I would assume that model is pre .pdf's.
IE. Too old to be in a pc format.
Good Luck all the same, maybe someone has it in hard copy?
Grizzly
-
31-10-2011, 05:56 PM #3
taffy-boy Guest
Re: York AWHC40L
i will second that yeah man
-
31-10-2011, 05:59 PM #4
Registered User
Hey, I am new to : RE
- Join Date
- May 2006
- Location
- uk
- Age
- 60
- Posts
- 5
- Rep Power
- 0
Re: York AWHC40L
Thanks all,
I've been in touch with York UK but they didn't hold out much hope!
-
31-10-2011, 06:43 PM #5
Super Moderator
- Join Date
- Sep 2007
- Location
- Somerset
- Age
- 69
- Posts
- 4,698
- Rep Power
- 46
Re: York AWHC40L
So what's the problem with the chiller then bones?
There are a good few active x York guys on the forum.
So maybe someone can help?
Grizzly
-
01-11-2011, 09:04 AM #6
Registered User
Hey, I am new to : RE
- Join Date
- May 2006
- Location
- uk
- Age
- 60
- Posts
- 5
- Rep Power
- 0
Re: York AWHC40L
Hi Grizzly,We've been through the usual: flow switch HP,LP, compressor thermistor control. The cam timer (yes...it's got a cam timer!) turns to the start position but it doesn't start. The controller is a very quaint unit with rotary knobs but it seems to be OK as it drives the cam timer. The cam timer micro-switches are all OK but there are loads of relays for the solenoid valves etc. Would take hours to fault find!
