Results 1 to 9 of 9
-
29-09-2011, 05:17 PM #1
adding additional gas on mitsubishi r2 system
I need to add 7kg of additional gas to a r2 system what is the best way to put it in ??? Should i open valves and run up first or put it straight into pipework ???
-
29-09-2011, 05:41 PM #2
Re: adding additional gas on mitsubishi r2 system
Vac it down and lob it into the pipe work.
Open valves slowly when charged .
Any other additional gas can be flashed into the suction line.
Cheers
StuTool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!
-
29-09-2011, 10:00 PM #3
Re: adding additional gas on mitsubishi r2 system
cheers mate , im best running it in cooling arent i and throttling the liquid in slowly then to get rest of it in ??
-
29-09-2011, 10:04 PM #4
Re: adding additional gas on mitsubishi r2 system
normally you will get it all in=if the charge is calculated correctly but if not stick it in test cooling and throttle it into ur suction line
-
29-09-2011, 10:23 PM #5
Re: adding additional gas on mitsubishi r2 system
i am asuming the charge is correct because its been reclamied by someone and now ive been asked to a recharge the system now we have moved a fan coil , ive already put 10 kg back in but ran out of time to get final 6kg , was a bit unsure if running it short of 6kg would damage it
-
29-09-2011, 10:27 PM #6
Re: adding additional gas on mitsubishi r2 system
if i reclaim gas i use the reclaim rig to pump it back in,no loss then
-
29-09-2011, 10:45 PM #7
Re: adding additional gas on mitsubishi r2 system
i am asuming the charge is correct because its been reclamied by someone and now ive been asked to a recharge the system now we have moved a fan coil , ive already put 10 kg back in but ran out of time to get final 6kg , was a bit unsure if running it short of 6kg would damage it
-
29-09-2011, 10:49 PM #8
Re: adding additional gas on mitsubishi r2 system
yeah thats what i used mate to get that much in so far .... would you advise carrying that on til all in , then open valves ??? ...or open them up and test cool and throttle rest liquid in ???
-
29-09-2011, 10:59 PM #9
Re: adding additional gas on mitsubishi r2 system
u can open the valves and reclaim it all back into the system prior to running