Results 1 to 3 of 3
-
24-09-2011, 07:22 PM #1
Need information for Carrier 5H40 compressor
Anyone know where the unloader adjustment is on a Carlyle 5H40 compressor? What is the normal load and unload settings for a R-22 freezer. My pressures are 13#-210# and one cylinder head temperature is 285 and the other is 245. I disassemble the TXV and replaced a AC powerhead for a freezer one. I also changed a very dirty core drier. Opened TXV half turn. Superheat is 4 degrees. Temperature at suction service valve is 43 degrees. Pipe run is 120 feet with only an accumulator in the suction line. Am I looking in the right area?
-
24-09-2011, 08:05 PM #2
Re: Need information for Carrier 5H40 compressor
Hello Hawaii 50.
Give me some time and I will post the info you need via mediafire,
Follow the attached link.
Hope it helps?
Grizzly
http://www.mediafire.com/?0gcx6z1fipemc84Last edited by Grizzly; 24-09-2011 at 10:40 PM.
-
08-10-2011, 02:37 PM #3
Re: Need information for Carrier 5H40 compressor
Hello,
Go to http://www.carlylecompressor.com click on literature, 5F/H and then file 510/509 and/or 530/505. both those files will give you good insight on the operation of a 5H compressor.
Lloyd