Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2008
    Location
    philippines
    Age
    61
    Posts
    95
    Rep Power
    17

    sabroe smc 112 L valve spring



    hello fellow members,

    i recently ordered parts from ralco, and one part , in particular looks different from the original part . the part name is valve spring , part number 2141047. i attached picture of the parts. the left part is the new delivery , while the spring on the right is the existing part. haw anyone ever used this type of spring on smc series ? or is this really the appearanc eof the new spring for the smc series ? thank you for any info you can provide.
    Last edited by engrp; 20-09-2011 at 05:30 AM. Reason: picture did not attach



  2. #2
    Join Date
    Mar 2008
    Location
    philippines
    Age
    61
    Posts
    95
    Rep Power
    17

    Re: sabroe smc 112 L valve spring

    sorry guys, am having difficulty posting the picture. the file size is less than 100 kb. maybe i have problem with internet. post the picture later after conferring with my isp.

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: sabroe smc 112 L valve spring

    Hi engrp.
    Without looking at your pictures.
    I can take a good guess that what you have is the original ( a rolled flat strip with the ends not square. But protruding out like a blunt pencil.)
    Whilst the new replacement is a Helical coil spring.
    This is Sabroe replacement / upgrade.
    It has been this style for several years now.
    Grizzly

  4. #4
    Join Date
    Mar 2008
    Location
    philippines
    Age
    61
    Posts
    95
    Rep Power
    17

    Re: sabroe smc 112 L valve spring

    thnaks for the reply , grizzly. but what i have is the reverse. the original spring is the helical coil,and the delivered spring was the rolled flat strip , as per your comment. so in essence, what i got from ralco was a very dated replacement part. thanks , sorry , still having problems with my internet provider. (i can send attachments by email, but not thru this forum).

  5. #5
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: sabroe smc 112 L valve spring

    Don't worry, in my opinion the old style you have are more than good enough for the job.
    Just more expensive to produce that's all!
    I would just fit them and cease worrying.
    Grizzly

  6. #6
    Join Date
    Mar 2008
    Location
    philippines
    Age
    61
    Posts
    95
    Rep Power
    17

    Re: sabroe smc 112 L valve spring

    thanks again, grizzly

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •