Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2005
    Location
    belgium
    Posts
    51
    Rep Power
    12

    condensor screws



    Hello everybody,

    We have to make: a central with two srew compressors 134A.
    The condensors stay about 6 m lower than the compressors.

    Would be that a problem? Is it better to put the receiver as well down together with the condensors?

    And the condensor for the olicooler, we have to put this too down, would be that a problem?

    Thanks ahead,
    Greetings
    Nando



  2. #2
    Join Date
    Nov 2009
    Location
    India
    Age
    34
    Posts
    32
    Rep Power
    0

    Re: condensor screws

    Dear Nando...


    This will not be a big problem .

    Regards

  3. #3
    Join Date
    Jun 2011
    Location
    Australia
    Age
    37
    Posts
    288
    Rep Power
    14

    Re: condensor screws

    Hi Nando, generally the receiver needs to be below the condenser, so the liquid can drain out of the condenser into the receiver. Normal air cooled oil cooler 6m down should be ok.

  4. #4
    Join Date
    Nov 2005
    Location
    belgium
    Posts
    51
    Rep Power
    12

    Re: condensor screws

    thank you all
    greetings

  5. #5
    Join Date
    Sep 2009
    Location
    Iran
    Age
    60
    Posts
    431
    Rep Power
    11

    Re: condensor screws

    main thinks in screw compressor are oil separator and oil cooler, they should be close to compressor as far as we can.
    receiver should be lower than condenser

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •