Results 1 to 7 of 7
  1. #1
    Join Date
    Aug 2011
    Location
    iraq
    Age
    56
    Posts
    9
    Rep Power
    0

    Smile choosing a VRF system (inverter comp. or digital scroll)



    Hi there, i need some one to help me choosing a VRF system between:
    1- LG inverter comp.
    2- SAMSUNG digital scroll comp.
    building info.
    shopping center in BAGHDAD/IRAQ.
    Basement 2200 m2 (super market).
    two storeis of 8000 m2 clothes, jewlery, kids shops (100 shop each)
    last story is a 8000 m2 play ground and cafteries
    thank you for helping and sorry for hi jacking someones thread( as i say iam new to this)



  2. #2
    Join Date
    Mar 2010
    Location
    manila
    Age
    46
    Posts
    5
    Rep Power
    0

    Re: choosing a VRF system (inverter comp. or digital scroll)

    hi maythem, inverter compressor is good & digital scroll compressor is also good.. i think you can ask the resident engineer what is the building preference.. but personally i choose digital scroll compressor..

  3. #3
    Join Date
    Aug 2011
    Location
    iraq
    Age
    56
    Posts
    9
    Rep Power
    0

    Re: choosing a VRF system (inverter comp. or digital scroll)

    thank s to you centraklima , but the power consumption of the inverter is lower than the scroll one becuase of the scroll comp. works at full speed all the time not like the inverter one ... the end user needs me to give them the best choise with respect to
    1- long life equip.
    2- low service and care for equip.
    3- reasnable price
    4- low power needed (in iraq the electricty case is too complicated... so we have to provide a 4MW genset for at least 18 houres a day and 8700 houre annual)
    Quote Originally Posted by centralklima View Post
    hi maythem, inverter compressor is good & digital scroll compressor is also good.. i think you can ask the resident engineer what is the building preference.. but personally i choose digital scroll compressor..

  4. #4
    Join Date
    Aug 2006
    Location
    england
    Age
    49
    Posts
    3,874
    Rep Power
    46

    Re: choosing a VRF system (inverter comp. or digital scroll)

    We put a three pipe Samsung dvm111 in and personally i like the digital digital scroll, no inverter boards to fail, all compsressors run dol with just a contactor, if the digital comp fails it will carry on running on the others, when it unloads it does use less power than fully loaded but i'm not sure if its as cheap to run as an inverter.
    Something else i like is they only run at 2800rpm on 50hz, but i think some of the inverter comps run at 80 or 90hz and the idea of something running at 5000rpm for years just sounds like its going to wear out sooner.

    I would check to see what spares and technical backup is available locally, as this would be a major consideration.

    Jon
    Mostly found in Oxfordshire, UK :)

  5. #5
    Join Date
    Aug 2011
    Location
    iraq
    Age
    56
    Posts
    9
    Rep Power
    0

    Re: choosing a VRF system (inverter comp. or digital scroll)

    thanks joe, i appreciate your reply...you know some times we take the high price as a symble of better equipment,
    you see that samsung is cheaper than LG inverter by about 15% and the owners tell me that isnt that a fact that cheaper is worst....so i am a little bit confused between the LG inverter with idea of its a japanees invent(DAIKIN) and DAIKIN is still manufacturing the same type .
    althoug i heared from an eng in UAE have some troubles with LG inverter after two years and it become a big one reaches the courte of labor to solve it.(main prob. was the wear)

  6. #6
    Join Date
    Nov 2006
    Location
    Cheshire, UK
    Age
    56
    Posts
    360
    Rep Power
    18

    Re: choosing a VRF system (inverter comp. or digital scroll)

    Personaly I wouldn't use LG for a Dog Kennel never mind an 18,000m3 shopping complex!
    He who dies with the most Toys, WINS!

  7. #7
    Join Date
    Mar 2007
    Location
    INDIA
    Age
    41
    Posts
    31
    Rep Power
    0

    Re: choosing a VRF system (inverter comp. or digital scroll)

    Hi,

    The Inverter compressors will not run always at 5000rpm, whenevr high load is there, that time only, that means hardly 10 to 15 % of the total time .

    Rest of the time it is going to run at 60~80% of the load , Hence life time of the scroll will not get affect much.

    Ravi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •