Results 1 to 8 of 8
Thread: Sabroe NH3 Skid Intro
-
11-08-2011, 11:44 PM #1
Sabroe NH3 Skid Intro
Last edited by chillerman2006; 10-09-2011 at 05:13 AM.
If the World did not Suck, We would all fall off !
-
12-08-2011, 12:20 AM #2
Re: Sabroe NH3 Skid Intro
Is that a 163 rotatune or a std 202?
Sounds like a rotatune the way it's ramping up?
Grizzly
-
12-08-2011, 12:29 AM #3
-
12-08-2011, 10:22 AM #4
Re: Sabroe NH3 Skid Intro
To make progress is never good enough, I want to do better and better and better
-
13-08-2011, 12:00 AM #5
Re: Sabroe NH3 Skid Intro
Good video.
-
13-08-2011, 02:49 PM #6
-
14-08-2011, 11:26 PM #7
Re: Sabroe NH3 Skid Intro
Hi,
It is 163 Mk4, it has a separate oil vessel,
but not Rotatune ... motor is connected to female screw if I see it well...
main motor for rotatune can be connected to male rotor, only
also R types are without cylinder for capacity control ....
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
14-08-2011, 11:42 PM #8
Re: Sabroe NH3 Skid Intro
well, Josip you have all reason