Results 1 to 5 of 5
-
11-08-2011, 04:08 AM #1
improving poster
- Join Date
- Oct 2001
- Location
- Barranquilla , Colombia
- Age
- 74
- Posts
- 31
- Rep Power
- 0
Data of FRICK bare Screw Compressors
Friends and colleagues ,
To complete a Cross Reference Table , I require the Data of Displacement (M3/Hr or CFM) for 60 Hz or 50 Hz of the following Series of FRICK compressors : XJF , XJS , TDSH , TDSL , SGC , GDSH , YCCH .
The information provided may be partial .
Write to: carlosbarrantes@yahoo.com
Thank you for your help.
-
14-08-2011, 02:33 AM #2
improving poster
- Join Date
- Oct 2001
- Location
- Barranquilla , Colombia
- Age
- 74
- Posts
- 31
- Rep Power
- 0
Re: Data of FRICK bare Screw Compressors
Friends and Colleagues,
The information has already been completed with the help of Josep .
Thank you for your interest.
-
15-08-2011, 12:13 AM #3
Moderator
Site Moderator : and general nice guy
- Join Date
- Jan 2006
- Location
- Croatia
- Age
- 68
- Posts
- 2,263
- Rep Power
- 31
Re: Data of FRICK bare Screw Compressors
Hi, Carlos Barrantes
Now when you have Cross reference displacement table , maybe you can post it like PDF or JPEG here on RE forums .... if
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
15-08-2011, 12:17 AM #4
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Apr 2006
- Location
- UK
- Age
- 55
- Posts
- 1,908
- Rep Power
- 30
Re: Data of FRICK bare Screw Compressors
Evening Josip
Carlos has posted it here
http://www.refrigeration-engineer.co...ht=#post236578
R's chillermanIf the World did not Suck, We would all fall off !
-
15-08-2011, 12:22 AM #5
Moderator
Site Moderator : and general nice guy
- Join Date
- Jan 2006
- Location
- Croatia
- Age
- 68
- Posts
- 2,263
- Rep Power
- 31
Re: Data of FRICK bare Screw Compressors
Hi, chillerman2006
Thanks, I found it, but few minutes after I sent my above post
Originally Posted by chillerman2006
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
