Results 1 to 7 of 7
Hybrid View
-
08-08-2011, 07:14 PM #1
J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hello the Forum
Can anyone advise of spare parts or complete compressor of above type.
main part needed is a crankshaft but a compressor is also considered necessary.
Can you advise via alanwwolfy1@hotmail.co.uk
Regards
Alan
-
08-08-2011, 11:02 PM #2
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hi Alan.
Have you tried J&E Halls online.
As far as I know they still supply spares.
They are having wharehouse clearance sales on many of their spares at the moment includind V178 spares.
Grizzly
http://www.halltherm.com/?cat=7737
http://www.halltherm.com/?cat=7702Last edited by Grizzly; 08-08-2011 at 11:34 PM.
-
09-08-2011, 03:08 AM #3
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hi Grizzly,
J & E Hall compressors, recips, are they still being manufactured. They were made to last a long time. Still come across 5 x 4 recips plugging away at low revs, still doing the job and probably 40 years old.
-
09-08-2011, 10:16 AM #4
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hi Magoo.
I can't tell you exactly when production of the V block series was stopped.
They first launched them in 1950 and yes there a still loads around all over the world.
Especially in cold stores and breweries.
Their spares are still available till when I do not know?
Maybe someone can advise?
Grizzly
-
12-08-2011, 09:17 PM #5
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hello Grizzly and Magoo
We are very close to Halls but cost and delivery on shafts is big and long.
We need a compressor or shaft soonest.
The machine which failed is 34 years old and its still on R22.
Solution is either another compressor second hand, a rebuild which is hard graft as this has seized or retrofit
with a pair of screws.
Regards
Alan
-
12-08-2011, 11:03 PM #6
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
I think I know of one in Australia, but this might be to complicated with export etc.
if your interested I can make some enquiries.
-
15-08-2011, 05:21 PM #7
Re: J & E Halls 7 x 5 1/2 , compound, 8 cylinder compressor spares
Hi Ranger
Thanks for your reply.
Looks like customer may be biting the bullet and accepting a recommendation to go with 2 screw units compounded.
and also retrofit to R404A from R22.
Regards
Alan