Results 1 to 2 of 2
Thread: LG Dry Contact Issue
-
27-07-2011, 09:10 PM #1
LG Dry Contact Issue
Hi all,
Im working with 3 units and fitting an LG PQDSB to each indoor coil to switch a booster fan. (The indoor units are MB09AHL's)
Connected to the CN-CC port on the main board, as per the manual - but no life from the board.
I could believe a faulty board, but not 3, and not on every unit!
Is there something I've to do on the controller to enable these boards?
Cheers
Scott
-
30-07-2011, 05:47 PM #2
Re: LG Dry Contact Issue
i pressume you are adding a fresh air fan in to system if so scroll controller to 2nd option and authorize it