Results 1 to 5 of 5
Thread: Daikin Altherma question
-
14-07-2011, 05:45 PM #1
Daikin Altherma question
I have one small, but (for me) very important question.
I have EKSWW200V3 (200 litres) water tank. I like to know what is the heat exchanger volume (m2) in this and in the EKSWW300V3 (300 litres) water tank.
Tank you for all your help.
altherma.jpg
-
16-07-2011, 06:13 PM #2
Re: Daikin Altherma question
Might be a long shot I know but you could try emailing Daikin!
He who dies with the most Toys, WINS!
-
18-07-2011, 09:32 AM #3
Re: Daikin Altherma question
In the past weeks I sent a question to Daikin EU official support page, and also on their local offices in Italy and Austria. Till today, I have not received their answer.
-
18-07-2011, 01:50 PM #4
Re: Daikin Altherma question
Sorry to hear that. Seems like there're quite a lot customers of Daikin Altherma .Could you upload the manual and diagram, in which there're might be some clues. Actually there're some new tech which don't need any heat ex-changer in water tanks. The heat exchanging are done in the main unit. I think this is a more superior tech. Wave Heat Pump is one of those.
Last edited by Mark; 13-11-2011 at 12:47 PM. Reason: advert removed
-
04-08-2011, 10:16 PM #5
Re: Daikin Altherma question
the coil surface area is about 0.9 meters squared.