Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2007
    Location
    New Delhi, India
    Age
    37
    Posts
    14
    Rep Power
    0

    HGB- Line bursting frequently in Lierbert Emerson PEX130FA100



    Dear All,

    I am facing a frequent break down problem of Refrigerant Leak by bursting of HGB line after the HGB Solenoid Valve. Its a precision AC, Emerson/Liebert make with CEMS100 Controller with a cooling capacity of 30kW. There are four such units installed in the Data Center and all of these units have shown this problem at different time of the year. I have done certain observation and prepared an RCA. But somehow, I am not satisfied with my own analysis. Can someone help and enlighten on what can be a possible scenario where HGB is not successful.

    I am attaching the RCA (In pdf format) which I have drafted to explain the case.

    Rgds
    Siddhant
    Attached Files Attached Files



  2. #2
    Join Date
    Jul 2009
    Location
    Illinois
    Posts
    189
    Rep Power
    15

    Re: HGB- Line bursting frequently in Lierbert Emerson PEX130FA100

    I am not at all familiar with this type of unit, and I am assuming that the leaking is from a cracked refrigerant line, if in fact this is true then I would be more inclined to think that there is some unwanted vibration on this line and that it should be properly secured.

  3. #3
    Join Date
    May 2007
    Location
    Auckland
    Age
    74
    Posts
    3,362
    Rep Power
    37

    Re: HGB- Line bursting frequently in Lierbert Emerson PEX130FA100

    Possible the compressors are still bolted down hard for shipping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •