conversion of glycol evaporator into r-22 evaporator

[weng-alms]

hi everybody i'm new,

is it possible to convert the existing glycol evaporator into r-22 evaporator?
my concern is, glycol type has no distributor and txv, is it fine to change the inlet and put a distributor and txv?

[Sandro Baptista]

If it's for pump system it will work well, still it's not optimized for that 2 phase flow.

[install monkey]

am i understanding that u want to drain your wet, cooler and pipe r22 through the cooler to use it as an evaporator.
system pressure would be a concern,what about the auto air vent/drain point, this sounds like a disaster in the making.
i recommend getting a new evap coil designed for refrigerant with distributors and expansion valve. and u get chance to recycle the old coil/scrap yard

[weng-alms]

hi guys,
i am condemning it, we will supply new accu for r 22 and trying to figure out if we could utilize the existing glycol evap'r, kinda installing a distributor & txv, application temperature is +8 deg c.
what do you think guys?

[Sandro Baptista]

How much would cost you a new evaporator coil for R22 DX?

[weng-alms]

hi SB,

that's my problem, it is clients call. anyway here in Philippines that would cost almost 2M (importation), unit cooler alone.
for them it would be a waste of money. and besides it will be scrapped.
on the other side conversion would cause a lot of trouble and inefficiency, i will take your point, it will be a disaster if we go on conversion.

thanks a lot SB.

[Sandro Baptista]

2M?? What's the coin? Tell me in American dollars...or Euros.

[weng-alms]

PhP, that's 30000 usd.

[Sandro Baptista]

PhP, that's 30000 usd.

Each evaporator coil?? A lot of expensive. Now I understand you try to retrofit the coils...

[weng-alms]

yes, all charges includes, tax & mobilization.