Results 1 to 12 of 12
Thread: Anti tamper covers
-
23-06-2011, 01:29 PM #1
Anti tamper covers
Hi all,
I am having some trouble in a new office block I have taken over, the customer is turning the control off which is casing issues in keeping the temp of the office correct.
I have seen on some over sites that plastic covers have been put over the controller to stuff these,
The covers I have seen were pretty nice looking and not just like a ip65 clear boxes, can anyone help where I can get these covers.
Many thanks
Chris
-
23-06-2011, 02:11 PM #2
Re: Anti tamper covers
rs do them or what i find better is a key lock box the type you keep keys locked away in that way you can access easier than taking the front off
-
23-06-2011, 05:01 PM #3
Re: Anti tamper covers
What make and model is the system ? You can probably electronically lock the controller or limit the available functions.
Cheers
StuTool's ? check ! Condom's ? check !
If you can't fix it , f*ck it !!!
-
23-06-2011, 09:31 PM #4
Re: Anti tamper covers
I've used these in the past, I see that the price has gone up since then though.
http://www.heatingcontrolsonline.co....rge-p-343.htmlBrian - Newton Abbot, Devon, UK
Retired March 2015
-
24-06-2011, 08:46 AM #5
Re: Anti tamper covers
It is common practice in some places to use dummy controllers for those who like to temper with them and keep the operating controls in the main machine room. Everyone is happy.
-
24-06-2011, 09:00 PM #6
Re: Anti tamper covers
toshiba 3 wire controllers were good for that-disconnect the wire c and all u get is a display.
better still fit 2 contollers to a twin system,and watch them fight over a common setpoint /mode haha
-
01-07-2011, 11:20 PM #7
Re: Anti tamper covers
We fitted a lockable key cabinet to the controller at work:
http://www.bamfordtrading.com/produc...-included.html
£12 prob can find it cheaper - just remove the back of it and install over the controller.
-
03-07-2011, 07:58 AM #8
Re: Anti tamper covers
Spose that's a cheap solution back2space as long as the controllers internal stat is not being used?
He who dies with the most Toys, WINS!
-
03-07-2011, 10:39 PM #9
Re: Anti tamper covers
im going to a site on friday where the customer has had clear perspex lockable covers that has a gap to allow for air circulatiom for his panasonic controllers,will take pic for u and get suppliers info
-
04-07-2011, 07:17 PM #10
Re: Anti tamper covers
I like the idea of putting in a controller that does nothing, and placing a remote sensing unit in the ceiling space that does the actual work.
-
08-07-2011, 07:48 PM #11
Re: Anti tamper covers
luminati waycon
www.luminati.co.uk
01752888720
-
18-07-2011, 07:21 PM #12
Re: Anti tamper covers
hi you can get these from climate center.they are called stat guards.