After a compressor change on a R22 system what sort of discharge temp can I expect, measured directly on the pipe at present it,s over 100C with the pressure at 210 psi, the pipe from the condenser is at 40C with the low side pulling to almost zero, I know this indicates low charge and I am in the process of charging this system but as far as I can work out the HS should be 200psi with the LS at 60 psi, I am recharging with gas that was previously removed there is about 10 Kilo still to go in and topping up with reclaimed R22,
the previous compressor lost it's oil and seized, leaks etc have all been cured and tested to 250 pis any help will be great
DM