Results 1 to 5 of 5
Thread: panel mount clocks
-
28-04-2011, 07:38 PM #1
Senior Poster
- Join Date
- Nov 2008
- Location
- scotland
- Age
- 74
- Posts
- 232
- Rep Power
- 16
panel mount clocks
Any one know a suppier that stocks gauges I can panel mount
Dev
-
28-04-2011, 07:58 PM #2
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: panel mount clocks
kooltech have just got me some panel mounted gauges-normal mainfold gauge heads and a lipped ring to go round the 80mm gauge to mount but beware u also need 2 1/8mpte-1/4 male connectors to couple up to a flared connection.also the connections are at the bottom.
-
28-04-2011, 08:10 PM #3
Senior Poster
- Join Date
- Nov 2008
- Location
- scotland
- Age
- 74
- Posts
- 232
- Rep Power
- 16
Re: panel mount clocks
I think I will adapt and improvise cheers
Dev
-
28-04-2011, 08:38 PM #4
VIP Poster
- Join Date
- Aug 2006
- Location
- england
- Age
- 50
- Posts
- 3,856
- Rep Power
- 46
Re: panel mount clocks
Hi Dev,
Originally Posted by devlin maguire
What are you making?
(just curious after seeing your recovery machine post)
Jon
Mostly found in Oxfordshire, UK :)
-
28-04-2011, 11:19 PM #5
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: panel mount clocks
Bear in mind that most gauges have two screws in the back holding the cover to the gauge internals.
If you cut your panel hole to slightly under size of the gauge you could make up a bracket to fit those two screws that would clip onto the back of the panel door sheet.Brian - Newton Abbot, Devon, UK
Retired March 2015
