Results 1 to 3 of 3
-
23-04-2011, 08:01 AM #1
Cold room installations & various issues / on the spot solutions
Many of our members are working on cold rooms. I am interested in compiling the details on their experiences in working in other countries , various odd issues & the sort of on the spot solutions.
I had read one article on installations in Middle east & how it was different in those countries compared to Europe.
So many issues are site pertinent , & may be country specific.
This can be even in terms of manufacturing of panels , few odd issues which we never think of.
-
23-04-2011, 08:41 AM #2
-
25-04-2011, 08:07 AM #3
Re: Cold room installations & various issues / on the spot solutions
I would have loved to share that article, but it is not available NOW with me.!!!
But I do remember issues like
1. Use of Nylon bolts for through & through connections & its problems.
2. Various issues due to dust
3. Hot air zones & its effect on bowing of the wall panels.
4. Refrigeration units & their problems.
5. Doors & not so common issues in Europe with the installation of the doors etc.
I am trying to get a copy & if I get that it shall be definitely posted.