Results 1 to 2 of 2
  1. #1
    d9022's Avatar
    d9022 Guest

    Funny tube on the evap



    I've been given a disfunctional Kide walk in (but thats another story)
    I took the panels off the evap to clean out years of crud and noticed a
    coiled tube like a Cap tube solderd between the flow and return just
    before they enter the evap, any thoughts as to it's purpose.IMGP1124.JPG



  2. #2
    Join Date
    Apr 2008
    Location
    Southampton, England
    Age
    49
    Posts
    1,044
    Rep Power
    35

    Re: Funny tube on the evap

    In the expansion device corner, with a length of 9' and an internal diameter of .054" .......The Capillary Tube.
    In the defrost corner with a interval of 4 times each 24 hours and termination temperature of 12*C is........ Hot Gas.

    Cap tube goes up the suction pipe for a cheeky bit of subcooling. Top pipe goes to hot gas defrost solenoid.

    LET'S GET READY TO RUMBLE!!

    Andy, AKA Papa T - Undisputed Paperweight Champion.
    Last edited by Tayters; 14-04-2011 at 08:20 PM. Reason: Forgot my weight.
    Health and safety first..........unless I'm in a hurry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •