Results 1 to 6 of 6
-
14-04-2011, 12:08 AM #1
Parallel Compressors Rack - Design Book
Hello!!!
Does anyone knows if there is a book about the design of Parallel Compressors Rack, I mean one where it explain how to select the best combination of capacities/unloaders, how to design the pipes, how to select filters, how to design oil return system, and everything else that should be in the rack.
I hope you can help!!
Thanks!
-
24-04-2011, 10:02 PM #2
Re: Parallel Compressors Rack - Design Book
Hi , my email is wharton40@yahoo.com.mx .
I have Tyler,Kysor Warren and Husmann Manual.
Those are very heavy so is impossible to send you throw this forum.
-
24-04-2011, 10:31 PM #3
Re: Parallel Compressors Rack - Design Book
If you want a schematic...
http://www.sporlanonline.com/5-180_072010.pdf
or this one..
http://www.sporlanonline.com/5-268_032009.pdf
Oil management..
http://www.sporlanonline.com/110-136_012002.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015
-
28-04-2011, 07:09 AM #4
Re: Parallel Compressors Rack - Design Book
RACK design is complex .However ,I usually follow the following guideline
@ based on the total load , break down the total capacity on the optimum number of compressors
@ design piping suction, discharge & liquid
@ select accessories ( components like oil separator , oil reservoir , oil controllers, accumulators ) . The excersise needs to be balanced in terms cost since it is better to have individual o/s than a common o/s , for example .
@ load pattern needs to be incorporated accurately in system design ...... since it is not defined properly .
If you need my input , please send me a pm on ddk0123@gmail.com
-
17-06-2011, 08:24 AM #5
-
22-06-2011, 05:47 PM #6
Re: Parallel Compressors Rack - Design Book
http://www.eigil.dk/shop/product_inf...55475dc0f2874e and danfoss coolpack and cool select