Whats the capacity of repco bohn 400ta ?

[Toolman]

Chicken 220211 - Repco bohn 400ta.jpgChicken 220211 - Repco bohn 400ta.jpg

This evaporator is in a 2300mm x 2300mm room any ideas on its capacity ? It looks a little small for the room .

[Magoo]

assemble the evap, drain tray case in the right position may help, stop the by-pass air problem. Added it is installed ars about face. The back wall would be coolish.

[PaulZ]

Hi Toolman
The rated capacity as per the book is 1172watts at 5.6k.
How much clearance is there between the evap and the back of the cabinet, doesn't look much from the photo.
Paul

[Toolman]

assemble the evap, drain tray case in the right position may help, stop the by-pass air problem. Added it is installed ars about face. The back wall would be coolish.

Ah no not what I was looking for ..
I am looking for someone who has the capacities for these repco fan coils or this one in particular 400ta , this one isnt running at at all , cover has been dropped for a look by me . And this isnt really a coolroom coil more of a cabinet cooler coil so it shouldnt even be in the room.

[Toolman]

Hi Toolman
The rated capacity as per the book is 1172watts at 5.6k.
How much clearance is there between the evap and the back of the cabinet, doesn't look much from the photo.
Paul

Thanks PaulZ , I was getting desperate to find a capacity and had to try here , I did find the answer yesterday and it matches your capacity ( in an old tattered Actrol book ) wish I had all the old issues.
Its not too close to wall its just a bit small in capacity for the room ( not cabinet ) its in but try and tell the shop owner , they just say ( but it worked before it broke ) so all I can do is hang a units off this coil that slightly more capacity so it wont ice up every 1/2 hour .
Thanks again , see U on the road in Adelaide if I knew who you were?