Results 1 to 4 of 4
Thread: Daikin VRV 3 test mode
-
03-04-2011, 01:47 AM #1
Daikin VRV 3 test mode
Is it possible to run this system without passing the test mode. There is a faulty sensor but not critical until replaced. Any help is appreciated.
-
03-04-2011, 09:55 AM #2
Re: Daikin VRV 3 test mode
no. u have to do the wiring check and when u perform the auto charge it reads sensor values
-
03-04-2011, 08:38 PM #3
Re: Daikin VRV 3 test mode
which sensor is faulty and where in the system?
-
04-04-2011, 12:01 AM #4
Re: Daikin VRV 3 test mode
The current sensor for standard compressor