Results 1 to 13 of 13
Thread: Cold Room Panels
-
19-09-2005, 10:48 PM #1
Cold Room Panels
I have been using the German Celltherm panels for a while now
But I know there expensive
Looking for something good, easy to put together........ie must have cam locks.........and be polyurethane foam
but..........something competitive
Anyone got any sources?
Thx
-
20-09-2005, 01:38 AM #2
Re: Cold Room Panels
Hi Aiyub,
I'm not sure if this information is useful to you, but I thought I would go ahead and post it for your review.
Some quick locations to see if this meets your requirements.
I cannot comment on the quality of these, but I'm sure you or one of our associates on the forum should be able to determine if any of these are acceptable.
http://www.buildingdesign.co.uk/faci...ls-Ursa_UK.htm
http://www.frimatec-isocab.com/
http://www.thermal-composites.co.uk/
http://www.isowall.com/
http://www.stancold.co.uk/news/050217-kingspan.htm
http://www.etcdirectory.com/White-Pa...-Chambers.html
Hope this helps.
Regards,
US Iceman
-
20-09-2005, 11:07 AM #3
Re: Cold Room Panels
Hello ayoub..
what is the thickness that u r looking for, and what is the density also that you are looking for,, pre-painted or plastisol panels,, also what is the rate per square meter that u r getting.. and what is the quantity and location u want to ship to to see if this is feasible..
regards..Too Much Of Something Is Bad Enough
-
20-09-2005, 06:16 PM #4
Re: Cold Room Panels
Hello Mahmoud
For chillers, normally 70 mm , for Freezer a bit more..........80 mm or more
Im not looking very big rooms......
I was actually looking to see what our UK guys were using.........
But Im getting..............International Feedback!!!!!!!!!!!!!
But fair goes............Thanks for all the help Im getting!!
-
20-09-2005, 07:47 PM #5
Re: Cold Room Panels
A
i thought you'd asked this before...?
anyway
coldsec
polysec
isd
there are hundreds of 'em out there
xheers
richard
-
20-09-2005, 11:47 PM #6
Re: Cold Room Panels
Sorry
Im not sure why I really asked.........I feel like a duff now!!
I guess Im just too damn lazy to get my RAC Directory out and start ringing around!!!
But I think Ive got the job I quoted for using Celltherm panels.........so on this occasion Ill go with them.......
-
21-09-2005, 05:28 PM #7
Re: Cold Room Panels
hello Ayoub,,
it's ok man,, anyway to give an indication the square meter of 100mm polyurethane including accessoris (prepainted is 33 USD FOB-Dubai Ports)
go puplic man ..Too Much Of Something Is Bad Enough
-
30-10-2008, 03:11 PM #8
Re: Cold Room Panels
[quote=jeycon;124350]
jeycon's naughty bit of advertising was removed when Argus the Mod woke from his slumbers - in fact I've been down in Wales all day
James
You are obviously keen to advertise your Ware's!
No problem as long as you are like the rest of our sales guys.
1) offer professional advise where necessary (without bias)
2) Pay for the privilege of advertising on this free
advise forum.
( like the rest)
3) I hope your sales response when actually required
is a bit faster than your responses the the 2 posts you have so far replied to!
As Abe posted them back in 2005!
GrizzlyLast edited by Argus; 30-10-2008 at 07:25 PM.
-
30-10-2008, 03:25 PM #9
-
30-10-2008, 05:55 PM #10
-
30-10-2008, 11:03 PM #11
Re: Cold Room Panels
Argus & Brian.
No criticism intended. In fact I never even flagged this 1 up!
You guys cant be on patrol 24/7.
Besides it gives the likes of nh3wizard and myself the chance to have a bitch!
Why should you have all the fun.
Just as long as I haven't "rocked the boat" by criticising this guys post, in the first place?
Grizzly
-
30-10-2008, 11:53 PM #12
Re: Cold Room Panels
No offence taken at all Grizzly.
I know that if you had been seriously ticked then you would have hit the red triangle as you have done in the past.
Ooops, just looked up the thread, see Argus has been around (That'll teach me to hit the 'go to last post butto')Brian - Newton Abbot, Devon, UK
Retired March 2015
-
31-10-2008, 09:50 AM #13
Re: Cold Room Panels
Hello Guys
Glad my post from 2005 still alive and kicking.
And naughty, naughty..........that company trying to capitalise on some free advertising.
If youre that good, then plaster a proper ad up on this forum.
Thx to Grizz and HH£ for some handy detective work
Thx to Brian, Argus, for stealing a march and deleting that creepy message.
Similar Threads
-
Cold Room Design - minus 25deg C
By vijay_study in forum FundamentalsReplies: 34Last Post: 11-11-2009, 07:12 AM -
Cold storage - Onions room
By Kevin Yeo in forum FundamentalsReplies: 31Last Post: 14-02-2008, 03:42 PM -
Installation of cold room
By Josip in forum Legal-Business-MarketingReplies: 12Last Post: 12-03-2006, 09:20 PM -
Freezer Room Panels
By Feeze in forum Technical DiscussionsReplies: 10Last Post: 22-04-2005, 05:58 AM