Hello new here, i work in a large production facility. We have installed the Hench system wich allows us to have some control over energy usage. Has anyone had any experience with these systems , recomendations , this is a basic outline of our plant
2 stage- 3 boosters 2psig suction aqnd 5 high stage running 28 psig suction and 140 discharge. the condensers control was very tight now we are getting a 40psi swing 143 down to 107. in my opinion this is causing oil carryover and low operating temperatures through the compressors. we have mycom 500 hp comp. what is the best way to get rid of the large swing on discharge pressures? any help will be greatly appreciated, Mike