Results 1 to 7 of 7
  1. #1
    Nickolaos's Avatar
    Nickolaos Guest

    Signle Stage Questions



    Hello, i am relatively new to subzero cooling. I have a little devil evaporator, 1hp condenser and an aspera 1/8 hp. I tried two times make it work, using r404a,but i failed. Can anyone help me fix it please?



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Signle Stage Questions

    It would seem that you need to do some reading and finding a friend with the same interest.

    We cannot see your system from here and without any fact or figures your request is impossible to answer.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Nickolaos's Avatar
    Nickolaos Guest

    Re: Signle Stage Questions

    What exactly would you like to know. I have pictures, and pressures, which were wrong, and thats why it didnt work i think.

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Signle Stage Questions

    OK,

    What are the pressures/temperatures
    Sub-cooling, superheat

    If you don't supply the information we are not going to spend time dragging it out of you bit by bit.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  5. #5
    Join Date
    Mar 2011
    Location
    Canada
    Age
    32
    Posts
    6
    Rep Power
    0

    Re: Signle Stage Questions

    What did failed... ? Be more precise if you seek answer.

  6. #6
    Nickolaos's Avatar
    Nickolaos Guest

    Re: Signle Stage Questions

    Subcooling it had about 1 bar, superheat around 6.7 bar. Reading more about single stages and asking i think that superheat preasure should be about 200psi on load.

  7. #7
    Join Date
    Oct 2006
    Location
    England
    Posts
    1,847
    Rep Power
    21

    Re: Signle Stage Questions

    Quote Originally Posted by Nickolaos View Post
    Subcooling it had about 1 bar, superheat around 6.7 bar. Reading more about single stages and asking i think that superheat preasure should be about 200psi on load.
    Hello Nickolaos.

    You have all the descriptions wrong mate.
    It is either a lanuage thing or you don't quite understand
    what is being asked of you.

    We need to know specific pressures and temps throughout the
    system to have any sort of idea.

    I'll give you the benifit of the doubt and put it down to language.

    So you need to give us

    Suction pressures
    Discharge pressures
    Temp of suction pipe from the evaporator
    Temp of liquid pipe from condenser

    Then we need

    Air onto and off of the evap and Condenser.

    Then we need to know what you are cooling and what type of environment
    it is in.

    Extra things like is it cappilary, TEV, Temp range and other things like that.

    If you give us all the information we might be able to talk about
    things, but untill then we are just guessing.

    taz

    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •