Results 1 to 5 of 5
Thread: trane PCV chiller
-
06-02-2011, 07:34 PM #1
trane PCV chiller
I am pulling the motor on a pcv2f very soon.
I am looking for lifting specialty tools for the
valute etc.....I have never done a pcv.This
machine was built in `67 or 68
thanks
-
06-02-2011, 07:54 PM #2
Re: trane PCV chiller
Hi Timothy,
I haven't a clue sorry
Is that a 260 ton chiller?
Do Trane have any guidelines or manuals on working on the chiller?
Just out of interest, where abouts are you?
Jon
-
06-02-2011, 09:12 PM #3
Re: trane PCV chiller
jon,
Trane has a service guide which I have it talks about the lifting brackets but doesn't give a diagram or dementions on how to build them
Tim in K.C.
-
14-03-2011, 12:55 PM #4
Re: trane PCV chiller
Hello Timothy
Is the PCV with the motor thru the chiller?
Believe it was nicknamed 'sidewinder'
I have pulled the motors with slings only but that was back in the eighties.
Regards
AWW
-
18-03-2011, 12:49 PM #5
Re: trane PCV chiller
Hi Timothy,
Check your email.
Regards,
CV
Similar Threads
-
unloading Trane RTHA chiller
By aumeche96 in forum CommercialReplies: 1Last Post: 21-10-2010, 05:26 AM -
Trane chiller
By scrappy77 in forum CommercialReplies: 5Last Post: 22-08-2010, 08:51 PM -
Trane chiller problem
By dannycool in forum Air ConditioningReplies: 6Last Post: 08-04-2010, 11:31 PM -
AEC Pinical chiller with trane comp
By cptrdbrd in forum CommercialReplies: 1Last Post: 28-10-2009, 09:47 PM -
Trane CVHE 450 R11 Centrifugal Chiller
By albertjoseph in forum Air ConditioningReplies: 4Last Post: 06-10-2008, 03:23 PM