Results 1 to 2 of 2
Thread: Kobol Evap
-
05-02-2011, 09:28 AM #1
Kobol Evap
Hi have had two Kobol coils go in the same room, only 10 months old with leaks on the opposite side to the manifold, with what looks like little dimples on the copper, any idea what is causing it or is it a manufacturing fault, on 404a evaporating at -34c, room -22c
if you cant't fix it don't
-
05-02-2011, 05:13 PM #2
Re: Kobol Evap
have you read my post yesterday are you replying to it? because its like for like please advise
Similar Threads
-
Evap temprature change
By gerry79 in forum HydrocarbonsReplies: 0Last Post: 06-12-2010, 06:09 PM -
Oil distrubution problem with a evap, how to fix?
By Henry. in forum FundamentalsReplies: 3Last Post: 06-07-2010, 04:35 PM -
iced up evap coil
By wilks in forum FundamentalsReplies: 6Last Post: 31-08-2007, 09:15 PM -
how to wire in pause before evap fan kicks in after defrost ?
By knighty in forum ElectricalReplies: 10Last Post: 21-01-2007, 01:08 AM -
Evap motor no come on
By Apprentice in forum Technical DiscussionsReplies: 13Last Post: 04-12-2003, 04:07 PM