Results 1 to 1 of 1
Thread: Fujitsu split help
-
03-02-2011, 06:20 PM #1
Fujitsu split help
I am attending a site tomorrow with a ASYA18LCC/AOYR18LCC Wall mounted unit. The customer saids that when they turn the unit on to cooling mode, the fan runs for a while and then unit stops and flashes the leds on the unit 5 times. The unit repeats the led process constantly until the power is turned off.
It is a wireless remote.
I am only allowed access into room for 30 mins tomorrow due to the area being a high security room.
I expect it faults when the system attempts to bring the compressor in.
Due to the limited time on site I am allowed, I am just trying to gain as much info as possible.
Does anyone know what the lights flashing 5 times mean? Does this refer to a particular fault or is that just the error sequence? Not had much experience with Fujitsu...
Similar Threads
-
Fujitsu AOT45 Split Ducted PCB ISSUES
By bobby 14 in forum Air ConditioningReplies: 5Last Post: 27-11-2010, 07:42 AM -
Fujitsu split aircon
By Hungnvt in forum FundamentalsReplies: 2Last Post: 15-05-2010, 01:30 PM -
Fujitsu Split System Outdoor Fan Wiring Issue
By damo_666 in forum Air ConditioningReplies: 3Last Post: 29-03-2010, 03:04 AM -
fujitsu multi split, how it works??
By 123-steve909 in forum Air ConditioningReplies: 9Last Post: 04-06-2009, 07:07 AM -
Faulty Fujitsu invertor wall split
By nick_nst@aapt.n in forum Trouble ShootingReplies: 7Last Post: 30-06-2008, 08:04 PM