Results 1 to 9 of 9
Thread: Seal frick
-
31-01-2011, 10:18 PM #1
Seal frick
Hello boys:
would greatly appreciate who can help me with the manual installation of mechanical seal for compressor XJF151L FRICK.
THANKS
-
05-02-2011, 09:33 PM #2
Re: Seal frick
Hi, serviceman
sorry, do not have anything about that compressor (have only something for XJF 120
you can try here... need to register and pay..
http://rapid-pdf.com/join.asp?PID=9d8ad34b-7360-49ec-bea4-c0e7dda839a2&lbd=1〈=EN&ts=2/5/2011%204:24:50%20PM&q=frick%20screw%20compressors%20xjf%20151&cr=1
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
08-02-2011, 05:44 PM #3
Re: Seal frick
Hi is not a difficult job.
-
08-02-2011, 07:29 PM #4
Re: Seal frick
JOSEF:
would have more information of this mechanical seal?
-
08-02-2011, 08:16 PM #5
Re: Seal frick
If you buy a genuine seal you get all the instructions , don't you ?
-
08-02-2011, 08:21 PM #6
Re: Seal frick
What information do you need?
-
08-02-2011, 09:09 PM #7
Re: Seal frick
xjf151 mechanical seal installation
-
09-02-2011, 04:47 PM #8
Re: Seal frick
Sorry, not difficult.
-
09-02-2011, 05:37 PM #9
Re: Seal frick
question:
the assembled mechanical seal of xjf151l is equal to the 193l?
Similar Threads
-
Frick Seal failure
By Drizink43 in forum NH3Replies: 4Last Post: 19-07-2010, 05:10 AM -
Frick Premature Seal Failures
By Steve Wright in forum Industrial CompressorsReplies: 32Last Post: 11-06-2010, 02:34 PM -
Frick XJF shaft seal failure
By evapcoil1 in forum Industrial CompressorsReplies: 17Last Post: 22-05-2010, 03:56 PM -
Frick 193 shaft seal
By NH3ISFORME in forum NH3Replies: 12Last Post: 14-03-2010, 09:35 PM -
Frick shaft seal leaking
By Ian B in forum Industrial CompressorsReplies: 12Last Post: 27-01-2009, 10:31 PM