Results 1 to 11 of 11
Thread: Blast freezing of meat
-
21-01-2011, 06:47 AM #1
Blast freezing of meat
Dear Sir
Iwant to know the detail procedure of blast freezing from fresh cut meat till putting in the blast freezer. Specialy the precautions and or treatment if any to be provided to the meat before putting in the freezer. the maximum time allowed btween cutting and keeping in freeze.
Thanks and Regards.
Dear Sir,
I want to know complete blast freezing procedure of meat from fresh meat ( just obtained after slaughting ) till it is kept in Blast Freezer. Specially I want to know the precautions to be taken and or any treatment to be given before putting in the freezer. If it can be washed with water before freezing. Please reply.
Thanks and regards
Just after slaughting
After slaughting and cutting properly.
Thanks mbc
Hi, TESLA
I want to freeze EMU meat (Red Meat )Last edited by Josip; 26-01-2011 at 09:02 AM. Reason: Double post in two forums
-
21-01-2011, 12:34 PM #2
Re: Blast Freezing of Meat
hi , but why post the same thread twice?
-
21-01-2011, 02:39 PM #3
Re: Blast Freezing of Meat
Hi b.tikekar18
There are more than one ways of skinning a cat so you could expect a variety of answers. Depending on the type of meat and cooling/freezing process involved. eg fish are washed when skinned and filleted, put in a box with a plastic cover then blast frozen, then put into holding freezer. Where red meat or chicken may be processed a little different. Some old timers would say that red meat should hang for a few days to let rigamotus set in for a more tender cut. The slaughtering process will also have an effect and how soon it is gutted or offal removed. Whilst frozen a vapor proof seal on the product helps prevent freezer burn. Also while being stored a more stable temp with less deviation will decrease deterioration of product over time. ? have you ever bought ice cream that was half ice and half cream - this product has not had a stable temp or been stored at low enough temp. If you have a certain type of meat in mind let us know. Hence defrost parameters are important too.Last edited by Tesla; 21-01-2011 at 02:44 PM. Reason: Typo and added data
-
21-01-2011, 04:23 PM #4
- Join Date
- Sep 2009
- Location
- Iran
- Age
- 66
- Posts
- 672
- Blog Entries
- 1
- Rep Power
- 19
Re: Blast Freezing of Meat
Dear tikekar 18Each packing has oven line so each one has oven precautions how to put in blast Freezer.In your design you should look for these items1-Air flow ( capacity – direction – how it goes through goods) is very important2-Temperature of room (as much as you go to low temperature it give you good condition of goods )3-In your design you should put your defrost time in loading and unloading time of room.4-Insulation of room and door plus emergency equipment (lights and shot down the system) and choosing right lighting is very important.5-Mode of loading goods in room (Box pallets and Boxes and covering of goods is important )Last edited by mbc; 21-01-2011 at 04:25 PM.
-
21-01-2011, 08:19 PM #5
Re: Blast Freezing of Meat
ask a butcher?
-
21-01-2011, 08:27 PM #6
Re: Blast Freezing of Meat
Found this site .....
http://extension.missouri.edu/public...b.aspx?P=G2208
BestPracslaught1103.pdfReality is an elusion created by alcohol deficiency. Quaff and enjoy. [Yorkshire, UK]
-
21-01-2011, 08:36 PM #7
Re: Blast Freezing of Meat
fred west buried his meat to preserve it!
-
22-01-2011, 02:52 AM #8
Re: Blast freezing of meat
where do you want to start?. At the slaughter stage, process stage, cutting floor stage, personal and area hygeine stage, air quality stage. Plant hygeine stage
-
26-01-2011, 08:33 AM #9
Re: Blast freezing of meat
Hi, b.tikekar18
this should be more then enough for start enjoy in reading
http://www.fao.org/docrep/004/t0098e/t0098e00.HTM
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
26-01-2011, 09:18 AM #10
Re: Blast freezing of meat
Good book Josip,
I'll read it more carefully as soon I have time.To make progress is never good enough, I want to do better and better and better
-
26-01-2011, 12:10 PM #11
Re: Blast freezing of meat
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
Similar Threads
-
Quick freeze in brine solultion vs blast freezing seafood??
By lhwang78 in forum CommercialReplies: 9Last Post: 19-06-2010, 04:48 AM -
Blast Freezer Within Freezer
By rickmor in forum Technical DiscussionsReplies: 4Last Post: 18-06-2009, 03:37 AM -
Blast Freezing Q's
By Mutaz Suhail in forum IndustrialReplies: 7Last Post: 03-06-2009, 08:57 PM -
Blast Freezing
By Mutaz Suhail in forum FundamentalsReplies: 5Last Post: 25-03-2007, 01:08 PM