Results 1 to 6 of 6
-
19-01-2011, 04:56 AM #1
R407A as a substitute to R22 & R404a
I'm interested in getting some feedback from any one thats worked with R407A either as a replacment to R22 or R404A in med and low temp refigeration equipment or in new equipment?
-
19-01-2011, 05:19 PM #2
- Join Date
- Sep 2009
- Location
- Iran
- Age
- 66
- Posts
- 672
- Blog Entries
- 1
- Rep Power
- 19
Re: R407A as a substitute to R22 & R404a
what kind of information you need?
-
19-01-2011, 05:35 PM #3
Re: R407A as a substitute to R22 & R404a
Yes, in Frascold's there are preliminary tests going on. It looks a decent replacement for R404A
-
19-01-2011, 06:00 PM #4
Re: R407A as a substitute to R22 & R404a
Follow this link to Copeland's view/approvals.
http://www.hvacrinfo.com/Cope_quick_ref.htm
You should start with their Application Engineering Bulletins and go to Section 26.Thousands of HVACR manufacturers links! Visit: www.hvacrinfo.com
-
19-01-2011, 07:25 PM #5
Re: R407A as a substitute to R22 & R404a
We've done one retrofit with it so far, what info do you need?
Alec
-
19-01-2011, 08:39 PM #6
Re: R407A as a substitute to R22 & R404a
used it on low temp no problem however on med temp we had real headpressure fluctuations to the point we done two rooms and still had same fault and realy slow temp pull when room pulling about six dc mark .pulled it out and used reclaim 22
Similar Threads
-
R507 instead R404a?
By Friobernal in forum RefrigerantsReplies: 49Last Post: 09-04-2011, 12:42 AM -
Helpful stuff for r407a users
By Blueboy in forum Supermarket RefrigerationReplies: 1Last Post: 18-09-2010, 05:22 PM -
R404a to R407a conversion
By Silhouette in forum Supermarket RefrigerationReplies: 25Last Post: 18-09-2010, 08:13 AM -
Max low side pressure in R404A system
By Wilade in forum Technical DiscussionsReplies: 8Last Post: 25-08-2009, 09:23 PM -
R134a or R404a
By jingua_ph in forum RefrigerantsReplies: 4Last Post: 27-09-2006, 03:31 PM