Results 1 to 11 of 11
Threaded View
-
05-01-2011, 12:25 AM #1
3GS Compressor oil info please for R134a
Hi , i have a ac recovery compressor that holds 9.3oz 275cc of compressor oil for use with R134A and the info i can find says it should be oil type 3GS. i have been searching and think this will be vic 150 ? and looks like it is a mineral oil. I wondered if other oils can be used like PAG 150 in place of that ? but think they are synthetic ?
Also i know PAG oils are hydroscopic and did not know if mineral oils are also ?
Please can advice be given on what other oils can be used of if PAG 150 will be ok . Thank you for your help.Last edited by 540itouring; 05-01-2011 at 12:40 AM.
Similar Threads
-
Trane chiller Info
By sefuss in forum Trouble ShootingReplies: 2Last Post: 29-05-2010, 06:55 PM -
looking for info on old school reefer van
By ambush in forum TransportReplies: 1Last Post: 26-05-2010, 05:37 AM -
apprentice info please!!
By neil:) in forum TrainingReplies: 2Last Post: 25-01-2010, 01:12 PM -
DORIN Comporessor Info Needed
By MikeySq in forum CommercialReplies: 6Last Post: 17-11-2009, 11:25 AM -
Need info on the shaft seal system for scotsman
By The MG Pony in forum CommercialReplies: 4Last Post: 17-03-2008, 02:02 AM