Results 151 to 159 of 159
-
18-02-2011, 03:56 PM #151
Re: Mitsubishi Ecodans ASHP issues...
I rang Ecotec about these units, the guy I spoke to didn't know anything about them and said he would ask someone more senior to ring me, he hasn't to date.....................
-
18-02-2011, 04:32 PM #152
Re: Mitsubishi Ecodans ASHP issues...
Jon, don't you know the technology behind these things is so top secret that they can't even tell their customers!!
-
18-02-2011, 10:22 PM #153
Re: Mitsubishi Ecodans ASHP issues...
shhhh, he is not supposed to know about the monkeys
-
19-02-2011, 08:45 PM #154
Re: Mitsubishi Ecodans ASHP issues...
Guys, could this be my problem? The monkey has frozen to death?????
-
19-02-2011, 11:02 PM #155
Re: Mitsubishi Ecodans ASHP issues...
You were probably feeding him too many bananas and the condenser got clogged.
-
20-02-2011, 01:16 AM #156
Re: Mitsubishi Ecodans ASHP issues...
I think t'was the monkeys that installed yours tiredgeek
-
20-02-2011, 02:32 AM #157
Re: Mitsubishi Ecodans ASHP issues...
It is all a question of energy in/energy out...the monkeys cannot eat frozen bananas so they throw them at the condenser causing massive damage and since there is no input of energy to the monkeys they freeze to death. BF cannot take his shower and Tiredgeek gets to do a service call but it is a big problem because the monkeys were supposed to be shipped from Ireland and somehow 2 and 2 were not put together as it was a bank holiday so Tiredgeek (TG for short) could not do his service call as the supplier did not have a set of replacement monkeys and BF had cold showers for....ohh maybe 3 or more days as the courier somehow decided it was better to go watch the Isle of Mann TT (he got side tracked). No idea where the monkeys are now.
-
20-02-2011, 01:59 PM #158
Re: Mitsubishi Ecodans ASHP issues...
Comments on the technical aspects of this system are appreciated
-
21-03-2011, 11:26 PM #159
Re: Mitsubishi Ecodans ASHP issues...
Most units in the industry which are market leaders use algorithms which are calculated, this works on compressor frequency, time, outdoor ambient, condensing temperature and more than one sensor on the outdoor coil.
The termination is a combination of head pressure control, coil temperatures and on a wet system peak freeze can also terminate the defrost, peak freeze is a protection which terminates a defrost in teh event the system does not have enough water flow through the plate heat exchanger to stop it freezing.
Similar Threads
-
Mitsubishi Help
By NorthSeaTech in forum Trouble ShootingReplies: 0Last Post: 24-07-2010, 03:28 AM -
mitsubishi electric v mitsubishi heavy ind
By coolhibby1875 in forum Air ConditioningReplies: 8Last Post: 04-09-2009, 01:42 PM -
Few question about Mitsubishi Heavy Industrial air condition
By fireduck in forum Air ConditioningReplies: 55Last Post: 12-05-2009, 02:35 PM