Results 1 to 7 of 7
Thread: capillary sizing
-
16-12-2010, 05:52 AM #1
capillary sizing
Hi friends,
I've a 1.5 TR system supposed to work on capillary. The dia of the capillery is 0.080 inches.
The evaporating temperature is 20F and condensing temperature is 130F.
Please guide me in the capillery selection.
Thanks
-
16-12-2010, 03:01 PM #2
Re: capillary sizing
Try DanCap from Danfoss
http://www.danfoss.com/BusinessAreas...n_Software.htmBrian - Newton Abbot, Devon, UK
Retired March 2015
-
16-12-2010, 06:57 PM #3
Re: capillary sizing
hi
if u have 0.080 inches ur length is 1.57 meter
-
30-12-2010, 06:23 PM #4
Re: capillary sizing
BULLET, WATSCO, Supco.com and others cap manufactures have a cap tube sizing sheet.
Steve
-
30-12-2010, 06:27 PM #5
Re: capillary sizing
www.supco.com/images/20%20cap%20tubing.pdf
This is it
Steve
-
30-12-2010, 10:17 PM #6
Re: capillary sizing
Narendrak,what is the refrigerant?
-
15-01-2011, 01:24 PM #7
Re: capillary sizing
why we are using R404-A instead of R-22 in negative temp other than non -cfc
Similar Threads
-
Capillary Sizing
By majortom in forum FundamentalsReplies: 9Last Post: 30-06-2011, 01:29 AM -
Capillary tube sizing
By Sledge in forum RefrigerantsReplies: 7Last Post: 16-11-2010, 11:44 PM -
capillary tube sizing
By juliushhill in forum FundamentalsReplies: 8Last Post: 16-03-2010, 03:24 PM -
capillary sizing for R404a
By ding in forum Technical SpeculationsReplies: 8Last Post: 19-03-2008, 07:27 PM