Results 1 to 7 of 7
-
13-12-2010, 02:31 PM #1
600TR Carrier chiller vacuumization
I am attending a Carrier screw chiller of 600TR capacity. The cooler pipes brocken and water entered into the system. While vacuum iam getting only 2500 microns and company insisting for 500 microns. Last 5 day iam running the vacuum of 350lps capacity and there is no improement. please post your ideas
thank you
-
13-12-2010, 02:52 PM #2
Re: 600TR Carrier chiller vacuumization
I had a similar problem but was lucky that there was a steam boiler in the same plant room and was able to pass hot water through whilst vacuuming,in your case I would change the vacuum pump oil every few hours as if it becomes saturated with moisture it will give off moisture limiting the level of vacuum.
-
13-12-2010, 03:08 PM #3
Re: 600TR Carrier chiller vacuumization
using a moisture trap and performs sweeps nitrojeno
-
13-12-2010, 09:08 PM #4
Re: 600TR Carrier chiller vacuumization
Have you tried a triple evacuation?
-
19-12-2010, 07:15 AM #5
Re: 600TR Carrier chiller vacuumization
changing the vac pump oil regularly is a must with moisture in the system plus using nitro to triple vac as previusly mentioned
-
19-12-2010, 07:43 AM #6
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: 600TR Carrier chiller vacuumization
-
19-12-2010, 07:57 AM #7
Re: 600TR Carrier chiller vacuumization
love that word VACUUMIZATION!!!
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Carrier chiller 30ra/rh
By peterbw in forum Trouble ShootingReplies: 9Last Post: 02-11-2010, 12:46 PM -
carrier chiller 30ra/rh trouble shooting
By peterbw in forum Technical DiscussionsReplies: 0Last Post: 24-10-2010, 08:15 AM -
Carrier chiller basic board problem
By noushad123 in forum Trouble ShootingReplies: 25Last Post: 17-06-2010, 06:55 AM -
Carrier Chiller Help
By superswill in forum Trouble ShootingReplies: 7Last Post: 18-01-2007, 10:06 PM