Results 1 to 5 of 5
-
09-12-2010, 03:52 PM #1
Coolpack tutorial 9, help needed!
I am trying to use coolpack software (that rseems really interesting free tool) and I am not able to solve the exercise 9 of the tutorial dealing with dimensioning tool.
the first part (before accessing to the dimension tool) seems to work properly, the calculated COP agrees with the given solution.
Once the dimension tool is loaded, default values are loaded, so I (again) load inputs, i had previously stored.
Is it OK to do so?(a warning message is displayed in a popup window)
In the SGHX window, when I want to choose "thermal efficiency" option, an error message occurs.
Can someone help me?
Thanks
-
10-12-2010, 07:55 AM #2
Re: Coolpack tutorial 9, help needed!
A few screen captures to illustrate the post:
the warning message after having reloaded the inputs, fig 1.
the dimensioning tool, inputs loaded, fig 2.
The compressor tool, Qe value is not good, fig 3.
The error messages, fig 4 and 5.
Thanks for your help
-
11-12-2010, 07:05 PM #3
Re: Coolpack tutorial 9, help needed!
It looks like there is a bug in the system, suggest you report it to the manufacturers/software builders.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
11-12-2010, 10:00 PM #4
Re: Coolpack tutorial 9, help needed!
Thank for your advice Brian_UK. I wonder if coolpack is still maintained...
-
11-12-2010, 11:14 PM #5
Similar Threads
-
CoolPack and Domestic Refrigerator
By gmavrom in forum Tools and CalculatorsReplies: 0Last Post: 04-03-2010, 04:28 PM -
CoolPack Software
By jedax81 in forum Tools and CalculatorsReplies: 10Last Post: 03-06-2009, 06:16 PM -
Smart/As needed evap defrost?
By dkemper in forum FundamentalsReplies: 6Last Post: 27-10-2008, 07:25 PM -
CoolPack Cycle Input
By Bones in forum TrainingReplies: 4Last Post: 02-12-2003, 09:18 AM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM