Results 1 to 12 of 12
-
16-07-2001, 12:07 AM #1
Has anyone took the EPA certification test?
Which book or books do I need to find to study for this test?
Where can I find them?
Is there a website that can help me?
-
17-07-2001, 08:22 PM #2
You might find information online for the Ferris State University training manual for the test.
I just heard from another contractor that now the EPA is allowing "open book tests?" Is that true?:D
Dean
Subzero*psia
Extinction is simply proof of failure to adapt.
-
01-12-2001, 07:57 PM #3
only for mobile refrig. tests
-
02-12-2001, 03:46 AM #4
oops! i mean automotive
-
04-12-2001, 02:40 AM #5
Try MACS or you can go to www.rses.com for more info
I visit http://www.fuel-saver.org
-
04-12-2001, 10:24 PM #6
Try this website:-
http://www.epatest.comBrian - Newton Abbot, Devon, UK
Retired March 2015
-
05-12-2001, 06:32 AM #7
I assume that the EPA test is similar to our own C & G 2077/2078 safe handling qualification?
-
05-12-2001, 07:11 AM #8
Not sure about the differences...
You should be able to check it out at www.epatest.gov or www.rses.com
ZolarI visit http://www.fuel-saver.org
-
05-12-2001, 10:49 PM #9Originally posted by frank
I assume that the EPA test is similar to our own C & G 2077/2078 safe handling qualification?Brian - Newton Abbot, Devon, UK
Retired March 2015
-
08-05-2002, 04:58 AM #10
There are 2 tests that are open book-
The automotive and the Type I
But you have to shop around to find out who gives them. Most places make you take closed book tests.I visit http://www.fuel-saver.org
-
11-07-2009, 01:49 AM #11
Re: Has anyone took the EPA certification test?
ESCO Institute Section 608 Certification Exam Preparatory Manual (EPA Certification) (Paperback)
Yes I'm a carpenter, but I am going to Tidewater Community College for my heating air conditioning certification. My teach told me that all I would need to pass the EPA certification, is found in the manual listed above.
Hope this helps you,
Dave
-
18-11-2009, 11:49 AM #12
Re: Has anyone took the EPA certification test?
Yeah,
Dave @ ddk208 is right = the ESCO Institute Section 608 Certification Exam Preparatory Manual (EPA Certification) (Paperback)
has every answer to the EPA 608 test. The only thing I could use during my test was the back page of that manual which was the temp/pressure chart.
There are the 4 sections in that manual; but what REALLY helped to prepare me to pass my EPA ( universal certification ) was to study that manual with the available power point version of that same manual which was available to my jump drive from a friend.
ALSO: Take your time and READ the questions carefully as they try to trick you in what seems to be a simple question!
I scored 85+ and above on all 4 sections my first time at bat which again gave me the "universal certification".
Similar Threads
-
Pressure piping test
By Volnei in forum IndustrialReplies: 7Last Post: 03-07-2010, 10:30 PM -
Daikin VRV II Test Mode Failure
By KISS KISS BANG in forum Air ConditioningReplies: 8Last Post: 30-05-2010, 08:54 PM -
New Ammonia Certification in United States
By JerrydNH3 in forum NH3Replies: 11Last Post: 15-08-2006, 03:10 PM -
air cooling and heating coil test
By Lc_shi in forum Technical SpeculationsReplies: 8Last Post: 23-02-2006, 01:15 AM -
`skills / trade test???????
By pagey in forum Chit Chat & Service StoriesReplies: 26Last Post: 24-03-2004, 03:31 PM