Results 1 to 6 of 6
Threaded View
-
03-12-2010, 05:59 PM #1
Capillary tube Chart for Lenght vs Size
Hi all,
I got a situation where I need Capillary tubes of size: 0.094'' ID 15.75'' Lenght. Problem is, the manufacturer I deal with doesn't have this ID and could be three months before he can send me some.
I could get some 0.079 ID Cap tubes ( Closest I got on hand ) & I heard there were charts that could help me determine the right lenght to use. Where can I find those ?
It would be for R-22 @ 30 000BTU/Hr , 1 outdoor unit & 3 Indoor , Inverter Compressor. Do I have to get the same exact Capillaries or can I calculate equivalency with those 0.079 ID ones ?
I made the rule of three but really think it must be harder than that to find the equivalency.
Here's what it looks like..:
0.079 divided by 0.094 = 0.8404255
0.8404255 times 15.75 = 13.236701
So I would use a 13 7/16'' Lenght.
Waiting for your Expert advises
Thanks,
Nice site BTW !
Similar Threads
-
Capillary tube size, refrigerant, oil
By desA in forum FundamentalsReplies: 53Last Post: 23-02-2010, 05:11 AM -
Capillary Tube Characteristics
By Chef in forum FundamentalsReplies: 9Last Post: 10-03-2009, 01:03 PM -
:rolleyes: capillary tube size in distributor?
By abbasi in forum New TechnologiesReplies: 2Last Post: 08-07-2006, 03:56 PM -
metric capillary tube
By tralex in forum FundamentalsReplies: 5Last Post: 21-02-2006, 06:57 AM