Results 1 to 3 of 3
Thread: Light fittings in cold stores
-
30-11-2010, 10:54 AM #1
Light fittings in cold stores
We come across various ways of fitting the Light fixtures in a cold store.
Is there any standard or any formula to work out the no of fittings required ?
-
30-11-2010, 04:27 PM #2
Re: Light fittings in cold stores
I'm not sure of your question....But there is a whole science devoted to selecting fixtures and spacings based on cavity rations, desired footcandles at different levels above the floor, cleanliness and ballast degradation over time, illumination intensity and wavelength retention at low temperatures and on and on. A lot of this is listed by the CIE standards...
For a primer see:
http://www.rsltg.com/images/441_-_Math.pdf
-
30-11-2010, 11:12 PM #3
Re: Light fittings in cold stores
I work on 10watts per square metre.
Similar Threads
-
Light details in cold stores / processing halls
By smpsmp45 in forum NH3Replies: 1Last Post: 19-08-2008, 03:13 PM -
Flame Proof Fittings for Cold store
By smpsmp45 in forum NH3Replies: 12Last Post: 27-07-2008, 10:13 AM -
How many forum posters does it take to change a light bulb....
By taz24 in forum Chit Chat & Service StoriesReplies: 7Last Post: 04-02-2008, 07:05 AM -
light color in cold stores
By smpsmp45 in forum CommercialReplies: 5Last Post: 07-10-2007, 09:05 PM