Results 1 to 8 of 8
Thread: monoethylene glycol preparation
-
29-11-2010, 07:30 AM #1
monoethylene glycol preparation
Hello everybady,
I used to Calcium chloride solution as a second coolant but now i want to change it by monoethylene glycol so how can i prepare this solution to get set point (-40)? Quantity of solution 1000 liter
Thanks on advice
-
29-11-2010, 08:09 AM #2
Re: monoethylene glycol preparation
i mean Monopropylene Glycol not monoethylene glycol
-
29-11-2010, 11:01 PM #3
Re: monoethylene glycol preparation
Lots of data here...
http://www.engineeringtoolbox.com/pr...col-d_363.htmlBrian - Newton Abbot, Devon, UK
Retired March 2015
-
30-11-2010, 06:44 AM #4
-
30-11-2010, 07:22 AM #5
Re: monoethylene glycol preparation
Thanks alot Brian
-
30-11-2010, 01:52 PM #6
Re: monoethylene glycol preparation
Be careful. If you are changing and existing system. CaCl2 and Glycols do not mix. The stsrem must be 100% flushed of Calcium chloride before adding glycol.
-
01-12-2010, 06:23 AM #7
Re: monoethylene glycol preparation
Are the two interchangable as far as pump, and line sizing?
-
01-12-2010, 07:19 AM #8
Re: monoethylene glycol preparation
Similar Threads
-
Converting a system that uses ammonia to use glycol
By metallicork in forum Technical DiscussionsReplies: 5Last Post: 25-11-2010, 12:50 AM -
glycol
By thebigcheese in forum Technical DiscussionsReplies: 0Last Post: 04-01-2010, 07:20 PM -
glycol cooling system for soft dring
By faryuki in forum NH3Replies: 14Last Post: 21-04-2007, 03:44 PM -
Milk getting into glycol on chill press
By balerjoe in forum Trouble ShootingReplies: 16Last Post: 06-09-2005, 09:41 PM -
which glycol to use ?
By dchatta in forum RefrigerantsReplies: 4Last Post: 12-07-2004, 09:26 AM