Results 1 to 12 of 12

Thread: vacuum pump oil

  1. #1
    Join Date
    Oct 2010
    Location
    usa
    Posts
    15
    Rep Power
    0

    vacuum pump oil



    i was wondering what king of oil does vacuum pumps use?

    is there car motor oils that can work?

    if not then can refrigeration compressor oils work?

    and are there any universal refrigeration oils that work on a wide range of refrigerants so using the vacuum pump on multiple systems would not degrade the oil as fast?



  2. #2
    avico's Avatar
    avico Guest

    Re: vacuum pump oil

    Quote Originally Posted by ejonesss View Post
    i was wondering what king of oil does vacuum pumps use?

    is there car motor oils that can work?

    if not then can refrigeration compressor oils work?

    and are there any universal refrigeration oils that work on a wide range of refrigerants so using the vacuum pump on multiple systems would not degrade the oil as fast?

    Refrigeration oil is recommended
    I usually do that: Suniso 4Gs or 5GS also OK

  3. #3
    Join Date
    Sep 2008
    Location
    england
    Posts
    427
    Rep Power
    20

    Re: vacuum pump oil

    don`t use engine oil in a vac pump as it has detergents and other additives in it that won`t do your pump any good.

  4. #4
    Join Date
    Aug 2006
    Location
    england
    Age
    50
    Posts
    3,856
    Rep Power
    46

    Re: vacuum pump oil

    Quote Originally Posted by ejonesss View Post
    i was wondering what king of oil does vacuum pumps use?

    is there car motor oils that can work?

    if not then can refrigeration compressor oils work?

    and are there any universal refrigeration oils that work on a wide range of refrigerants so using the vacuum pump on multiple systems would not degrade the oil as fast?
    Vacuum pumps use vacuum pump oil, which is available at all good hvac wholesalers.

    You can put any oil you like in your pump, but like one of my customers at a bakery who put cooking oil in their air compressor found out, it won't work very well or for very long.

  5. #5
    Join Date
    Aug 2007
    Location
    Sydney
    Age
    51
    Posts
    1,083
    Rep Power
    23

    Re: vacuum pump oil

    It's more about the boiling point of the oil and under a vacume oil will boil at a lower temperature. Also how the oil reacts with contaminants like water. So if you want your vac pump to last and pull deep fast vacumes use good quality vac oil. I change mine almost every time and sometimes several times during the process depending on the amount of moisture and size of the system.

  6. #6
    avico's Avatar
    avico Guest

    Re: vacuum pump oil

    Say again. refrigeration oil is reccomended for where hard to buy premium VAC oil
    Such as here, VAC oil is N/A. then i use Suniso 4GS. Very good working also have longlife time too, have never need repair

  7. #7
    Join Date
    Oct 2010
    Location
    usa
    Posts
    15
    Rep Power
    0

    Re: vacuum pump oil

    i see belt driven air compressors like you can get at most stores like sears use oil too.

    would air compressor oil work safely in vacuum pumps?

  8. #8
    Join Date
    Sep 2008
    Location
    england
    Posts
    427
    Rep Power
    20

    Re: vacuum pump oil

    Quote Originally Posted by ejonesss View Post
    i see belt driven air compressors like you can get at most stores like sears use oil too.

    would air compressor oil work safely in vacuum pumps?
    Most recip compressors run on an SAE 68 or if they`re in a very hot environment a 100 oil. I often work on vac pumps and they typically run on a 100 oil or a 150 (like treacle when it`s cold) if they`re in a hot plant room. The additives would be different too as compressor oil usually has anti foaming agents.
    I can`t really see the benefits of constantly changing the oil, other than good profits for the manufacturer, as the pumps I work on have an oil life of 1000 hours and they go on for years often in dusty conditions.
    But there again if you feel happier with frequent changes go for it.

  9. #9
    Join Date
    Oct 2010
    Location
    usa
    Posts
    15
    Rep Power
    0

    Re: vacuum pump oil

    i was thinking because i was looking for a source where i can get replacement oil when needed and not have to rely on specialty stores to get it if the oils for air compressors would work and can be obtained from most tool dealers.

  10. #10
    Join Date
    Nov 2010
    Location
    United States
    Age
    41
    Posts
    6
    Rep Power
    0

    Re: vacuum pump oil

    Quote Originally Posted by glenn1340 View Post
    Most recip compressors run on an SAE 68 or if they`re in a very hot environment a 100 oil. I often work on vac pumps and they typically run on a 100 oil or a 150 (like treacle when it`s cold) if they`re in a hot plant room. The additives would be different too as compressor oil usually has anti foaming agents.
    I can`t really see the benefits of constantly changing the oil, other than good profits for the manufacturer, as the pumps I work on have an oil life of 1000 hours and they go on for years often in dusty conditions.
    But there again if you feel happier with frequent changes go for it.
    Umm..... and how many microns do you pull down to?

  11. #11
    Join Date
    Dec 2010
    Location
    Fl,United States
    Posts
    16
    Rep Power
    0

    Re: vacuum pump oil

    Vac pump oil , I change it after 5 or 7 vacuums since after that time it takes longer to reach 200 microns, some people don't change it at all but I do

  12. #12
    Join Date
    Feb 2010
    Location
    Ireland
    Age
    38
    Posts
    82
    Rep Power
    15

    Re: vacuum pump oil

    Would u change your vac pump oil if u ran your pump on a system that u knew had moisture in it? Changing the oil is essential if u want to pull deep vacs and not damage your pump.

Similar Threads

  1. Refco Royal 2 Vacuum Pump Oil?
    By Isaac-1 in forum Technical Discussions
    Replies: 2
    Last Post: 09-05-2010, 03:14 AM
  2. Vacuum Pump Questions
    By position1 in forum Fundamentals
    Replies: 7
    Last Post: 08-10-2009, 02:33 AM
  3. vacuum reduces when vac pump is isolated
    By bill1983 in forum Fundamentals
    Replies: 40
    Last Post: 04-08-2009, 08:00 AM
  4. Troubleshooting a vacuum pump and gauge set.
    By Old Codger in forum Fundamentals
    Replies: 7
    Last Post: 08-08-2008, 05:13 PM
  5. inverters pulling vacuum
    By bangoman in forum Air Conditioning
    Replies: 2
    Last Post: 05-02-2008, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •