Results 1 to 2 of 2
-
18-11-2010, 02:36 PM #1
york recip chiller model circa 1985
I'm trying to communicate with the two old York chillers. It's a Millennium chiller controlled by the York BMS now, we will be removing the York BMS and installing a new Honeywell, Siemens or Distec. Is Modbus the best solution.
-
21-11-2010, 06:18 PM #2
Re: york recip chiller model circa 1985
modbus is the easy way but you coud try to monitor only inlet and outlet water temperature and remote start stop compresor and general operations.
Similar Threads
-
york recip chiller model ydaj77xt9
By kolab technical in forum Trouble ShootingReplies: 9Last Post: 10-01-2011, 07:23 PM -
YORK YAEP recip chiller fault
By chiller1 in forum Trouble ShootingReplies: 8Last Post: 04-06-2010, 10:41 AM -
Info for York MaxE Centrifugal Chiller model YK (YKFBFBH7-CWF) 750ton
By ControlsBrat in forum New TechnologiesReplies: 4Last Post: 13-04-2010, 06:06 PM -
York Recip Chiller LTHD
By iceman007 in forum Trouble ShootingReplies: 11Last Post: 18-01-2010, 10:44 AM -
York Recip Millenium Chiller
By iceman007 in forum Trouble ShootingReplies: 12Last Post: 28-07-2009, 07:21 PM